-- 7 --
HEAT mode operation procedure
3.Press SWING button, the
louvers start to rotate auto-
matically, and stop when re-
press it.
4.Press FAN button, set fan
speed.
5.Press TEMP. button, set
suitable SET TEMP.
1.Plug in, press 1/0 button,
then air conditioner is turned
on.
2.Press MODE button, set
operation mode.
1/0
If room temp. is lower than set temp. , compressor runs at HEAT mode.
If room temp. is higher than set temp., compressor and outdoor fan motor stop, only indoor
fan motor runs a while and stop.
SET TEMP. should be in range of 16
o
C to 30
o
C.
When the unit (cool only) recieved the con-
trol signal which is used under the heat mode,
it will operate according to the fan mode.