29
1 How to install the panel
Before installing the panel, set the horizontal vane to the position as shown below.
Insert the bottom of the panel under the horizontal vane.
Set the top of the panel.
Push the panel as the arrow mark to fix to the air conditioner.
2 Removing the indoor unit
Remove the bottom of the indoor unit from the installstion plate.
When releasing the corner part
Release both left and right bottom corner part of indoor unit and pull it downward and forward as shown toto release the
hooks.
If the above method cannot be used
Remove the front panel and insert hexagonal wrenches into the square holes on the left and right as shot the figure below,
then push them up; the bottom of the indoor unit is lowered and the hooks are released.
For movement and maintenance
1) Horizontal vane
(slightly downward)
Horizontal vane
Square hole
Push
Lowers
(4) Push
(3)
(2)
