24
Note: Be sure that the plastic square rings are tightly installed in the holes of the rear panel to protect
the connection cords and the thermal insulation hose are tightly wrapped the connection cords
near the rear panel in case of leakage of electricity and rain water.
Indoor/outdoor wire connection and outdoor power supply cord connection
=
Connect wire from the indoor unit correctly to the terminal block.
=
For aftercare maintenance.give extra length to connecting wire.
Rated voltage
Breaker capacity
Power supply cord
Indoor unit
220
230V
10A
4G1.0
Outdoor unit
220
230V
25A
3
2.5
CAUTION:
=
Be careful not to make mis-wiring.
=
Firmly tighten the terminal screws to prevent them from loosening.
==
After tightening,pull the wires lightly to confirm that they not move.
=
If the connecting wire is incorrecty connected to the terminal block,the unit does not operate normally.
=
Switches shall be connected to the supply terminals and shall have a contact separation of at least 3 mm
in each pole.
Teminal
block
Lead wire
<Connection details>
Loosen terminal screw
Cable clamp
Power supply cord
Indoor unit connection wire
WARNING:
Be sure to attach the terminal block covers/panel of the outdoor unit securely. if it is not attached correctly, it could result
in fire or an electric shock due to dust,water,etc.
