Munchkin MKCA0807, Owner'S Manual

Page: 8 / 36

How to Use
8
CLEANING THE WIPE WARMER
Always unplug the unit and allow it to cool down before cleaning. Remove any wipes and
wipe unit clean with a non-abrasive cloth.
Do not immerse the unit or power cord in water as this could create an electrical hazard.
In rare cases, wipes may become discolored due to prolonged exposure to heat.
PREPARING THE WIPE WARMER
Place the unit on a flat, stable surface. Connect the male and female plugs, and then plug
the power adapter into a standard household 110-120 volt AC outlet. Do not plug into a
220 volt AC outlet. The indicator light will be on when functioning properly and the unit
will begin warming. Only use with a Class 2 Adapter.
Use the cover indent on the front of the clear body to lift open the main cover.
NOTE: Plugging in the power cord is the only way to turn the wipe warmer on and off.
1 .
Remove baby wipes from their
original package and place them
inside. The unit accepts up to 100
wipes (depending on brand); do not
overfill. Both lids should be able to
completely close.
2 .
With the main cover open, push
a corner of the top-most wipe
through the wipe opening. Then,
close the main cover.