7
6. Operation Description
6.1 Main Screen
In standby mode, once the object is detected the screen will be shown as follows
(button backlight and swipe card indicator light at the same time):
Remark:
The IR induction distance
≤ 700mm.
In night vision mode, the button backlight and swipe card indicator are always
light.
6.2 Visitor Call
>> Press the
up or down button to enter the name list page, you can select the room
number you want to call and then press
“#” button or talk button to start the call;
>> You can also call from the number buttons: input the room number you want to
call and then press
“#” button or talk button to start the call;
>> Press the guard button to enter the guard & doorkeeper list page, you can select
device you want to call and then press
“ # ” button or talk button to start the call;
>> When there is only one Guard in the system, press guard button, it will call directly.
Remark:
In the name list page, you can p
ress “*” button to return the main screen; in
the dial page, you can p
ress “*” button to delete the number.
During the call, you can p
ress “*” button to end the call; but during talk, it is
not permitted to end the call;
The way to input the address: call room 1
--
dial 001 or 01 or 1; call room 12
--
dial 012 or 12
(only call flats belong to this block)
