Chapter 3 – Fax Class 2 Commands
Multi-Tech Systems, Inc. SocketModem MT5600SMI/MT5656SMI Reference Guide (S000306C)
90
Command: +FCIG: Report the Polled Station ID
Description:
This response reports the received transmit station ID string, if any. This
message is generated in execution of Originate, Answer, +FDT, or +FDR
commands.
Syntax:
+FCIG: “< ID string>” Polled Station ID
Command: +FDTC: Report the Polled Station Capabilities
Description:
If the answerer has a document to poll, it would be communicated to the
originator in bit 9 of the DIS frame. The originating station may elect to
transmit a fax, and later, send SIG and DTC frames to pick up the polled
document. The answering station would report the incoming DTC frame via
the +FDTC: response message after command mode is canceled with the
AT+FDR command.
Syntax:
+FDTC: “< string>” Polled Station Capabilities
Command: +FPOLL Indicate Polling Request
Description:
This message is sent to the DTE if the received DIS message indicates that
the remote station has a document to poll (by bit 9 in the DIS) and polling has
been enabled with the AT+FSPL command. The DTE may then decide to
receive rather than transmit.
Syntax: +FPOLL:
