Multitech RouteFinder RF802WLC, Quick Start Manual

Page: 11 / 30

6
:LQGRZV170(,QVWDOODWLRQ
1. Be sure that there is no PCMCIA adapter inserted in your
computer.
2. Start your computer.
3. Insert the System CD in the computer’s CD-ROM drive and
click
Setup
.
4. Accept the license agreement.
5. Select
SSID
. The default is
ESSID
. You can change this later
using the Configuration utility or network configuration.
Click
Next
.
6. Select the network type and click
Next
. The default is
Infrastructure
.
7. Click
Next
to accept the default destination folder. To change
the path, click
Browse
, navigate to the folder you want, and
then click
Next
.
8. Setup will add the program icon to the Program Folder. You
can enter a new folder name, or select one from the existing
Folder list.
9. It takes a few seconds for copying the utility files. Click
Finish
.
10. Insert the RF802EW card into the open PCMCIA slot and
restart your PC.
11. Click on
Control Panel
and then on
PCMCIA Card
. Verify that
the RF820WLC card is installed in one of the sockets. If you
find
Wireless LAN 11 Mbps
in one of the sockets, the card is
detected properly.
12. Check for the
Wireless LAN 11 Mbps
by right-
clicking My
Computer
. Select the Device manager and then Network
Adapters. A yellow question mark (?) on the adapter, shows
the installation is not successful. Select the adapter and click
Remove
. Restart your computer after uninstalling the driver to
make the changes effective.
13. Right-click the
Network Neighborhood
icon.
14. Click
Properties
on the shortcut menu. The
Network
box
appears and you see three main tables:
Configuration
,
Identification
, and
Access Control
.
15. Click the
Configuration
tab and then click
Add
.
The Select
Network Component Type
dialog box appears. Click the
Protocol
tab, then click
Add
.