Chapter – Networking Basics
Multi-Tech Systems, Inc. Wireless Network Adapter User Guide
42
Configuring a Dynamic IP Address
When the drivers were installed, the default for the IP Address was set to obtain IP
dynamically through a DHCP server.
If you need to check or change the settings, complete the following steps:
1.
Select
Start
>
Settings
>
Control Panel.
2.
Double-click on
Network
.
3.
The
Network
dialog box displays. Highlight
TCP/IP for USB 11Mbps Wireless
Network,
and then click the
Properties
button.
Note:
If TCP/IP is not present see the section on
How to Install TCP/IP
.
