Multitech RouteFinder MTASR3, User Manual, Page: 68 / 113

Chapter 6 - Remote Configuration and Management
MTASR3-200 68
Verify that the Communication Type field is set for COM Port and the Select Port option from
the drop-down list matches the COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of the
remote RASFinder.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different from the defaults in the dialog box, refer to your modem user documentation and change
the values to match those required by your modem.
When you are satisfied with your selections, click OK.
6. Run the RASFinder Configuration program. Click Start | Programs | RASFinder | RASFinder
Configuration, or double-click the RASFinder Configuration icon in the RASFinder program
group.
7. The Dialing Router dialog box displays while software is dialing the remote RASFinder.
8. Once the Dialing Router dialog box completes, the Reading Setup dialog box displays.
9. Once the Reading Setup dialog box completes, the RASFinder - Router Setup dialog box
displays. This is the remote RASFinder dialog box. Refer to the on-line Help for a description of
each dialog box and field within a dialog box.
10. After you have changed the configuration of the remote RASFinder, click the Download Setup
button to update the configuration. The remote RASFinder will be brought down, the new
configuration written to the unit, and the unit will reboot.
11. After the downloading is complete, click Exit.
12. The Hangup connection with Router? dialog box displays
Click Yes to disconnect the phone connection to the remote site.
13. If the same telephone number is not going to be used again in the immediate future, you may
want to remove it from the Port Setup dialog box.
14. At the remote site, reconnect the RASFinder to the serial port of the PC and from the Program
Manager screen click the Router Configuration Icon to verify that the RASFinder is running.