Multitech RouteFinder MTASR2-203, User Manual, Page: 11 / 90

Chapter 1 - Introduction and Description
MTASR2-203 11
Specifications
The RouteFinder conforms to the following specifications.
• Routing Protocols - IP and IPX and bridging for all others
• WAN Interface - 1 async or sync link (RS-232C/V.35)
• Command Port - 19.2 Kbps asynchronous
• T1 DSU - 1.544 Mbps synchronous
• Ethernet LAN Interface - 10Base-T (twisted pair)
• Two 4-megabyte DRAMs (1 meg by 36 bytes at 70 nanosecond SIMMs)
Caution: SIMM speed and size cannot be mixed.
• 1 MB of Flash memory
WAN 2 Port
• 115.2 Kbps asynchronous RS-232/V.35 (WAN 2) or T1 (1.544 Mbps) sync link using DB25
male connector. Optional ITU-T V.35 interface using a V.35 adapter cable.
Command Port
• Single 19.2 Kbps asynchronous Command Port using a short RJ-45 to DB9 cable with a
female connector.
T1 DSU Port
• Single T1 line port with synchronous data format
• AMI or B8ZS line coding
• D4 Super Frame or Extended Super Frame support
• 1 to 24 channels at 56 Kbps or 64 Kbps each
• RJ-48 jack
Ethernet Port
• One Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector
Electrical/Physical
• Voltage - 115 VAC (Standard), 240 Volts AC (Optional)
• Frequency - 47 to 63 Hz
• Power Consumption - 10 Watts
• Dimensions - 1.625" high x 6" wide x 9" deep
4.13 cm high x 15.24 cm wide x 22.86 cm deep
• Weight - 2 pounds (.92 kg)
• Temperature
Operating: 32 o to 122 o F (0 o to 50 o C)
Storage: 4 o to 158 o F (-20 o to 70 o C)
• Relative Humidity - Up to 95%, non-condensing