PRODUCT OVERVIEW
QuickCarrier
®
USB-D MTD-MAT1 User Guide
5
Chapter 1 – Product Overview
Overview
The QuickCarrier™ USB-D (MTD-MAT1) is a cellular dongle designed and built for machine-to-machine M2M
communications specifically for AT&T networks. This packaged device can be connected directly to any USB port
on a laptop, desktop computer, and other mobile devices.
The MTD-MAT1 allows access to wireless broadband for a variety of M2M applications. The dongle was designed
to withstand extended use. With implementation of LTE Cat M1 cellular technology, the MTD-MAT1 is accepted by
developers as a reliable low-power device that brings 4G LTE capabilities to an assortment of Internet of Things
(IoT) devices that are used to connect and exchange data. The MTD-MAT1 quickly became an integral part of the
MTD Series product-line from MultiTech.
Documentation
The following documentation is available on the MultiTech website at
http://www.multitech.com/brands/quickcarrier-usb-d
.
Document
Description
Part Number
QuickCarrier™ USB-D MTD-MAT1
User Guide
Provides an overview, product specifications, safety and
regulatory information, SIM card installation instructions,
and basic end-user operation instructions.
S000675
USB Driver Installation Guide for
LTE Devices
Provides instructions for installing USB drivers on Linux and
Windows.
S000616
Telit ME910C1, AT Commands
Reference Guide
Provides AT commands and parameters used to configure
your device.
80529ST10815
A
MTD-MAT1 Specifications
Category
MTD-MAT1
General
Frequency Band
4G Bands (MHz): B2 (1900); B4 (1700) AWS; B12 (700)
Device bandwidth:
1.4MHz for both downlink and uplink
Cat M1 Speed
Data Speed
Half duplex mode: 300 kbps downlink; 375 kbps uplink
Full duplex mode: Not applicable
Maximum transmit power
20 dBm
Interface, Antenna, SIM Holder
USB Interface
USB 2.0 high speed compatible, Type A
Antenna
Internal
SIM Holder
Standard Mini SIM 1.8/3Volt
