USING CONNECTION MANAGER
QuickCarrier
®
USB-D MTD-MAT1 User Guide
19
h.
Select the COM port that you noted from COM ports, then click
Next
.
i.
Click
Finish
to exit the Wizard.
j.
Navigate to
Device Manager
>
Modems
and confirm that the device is added.
Troubleshooting
Serial COM port is not available in the Serial Modem Settings
This can happen if the modem was installed while Connection Manager was running.
Close Connection Manager and reopen it.
Device is not detected ("No Device")
After following the steps to activate your device, the Main tab still indicates "No Device."
Try the following steps:
1.
Click the
Settings
tab and make sure that the appropriate modem type is selected: USB or Serial.
2.
If you are connecting a serial device, make sure that all serial modem settings correspond to the
serial modem and serial port configuration.
