Chapter 2 – Installing the Router
30
MultiModem rCell User Guide
Note:
If this window displays your current IP configuration, it is recommended that you record this information
for future reference. This information is handy, for example, if you want to return the computer to its original
settings.
Setting a Static IP Address
To set a static IP address:
1.
Select
Use the following IP address
.
2.
In the IP address field type the IP address of the computer, for example 192.168.2.x.
Note
: The
x
in the address stands for numbers 101 and up.
3.
In the
Subnet mask
field, type the number of the subnet mask, for example: 255.255.255.0
4.
In the
Default Gateway
field, type the default gateway, for example, 192.168.2.1
Note:
The computer settings must be in the same subnet range as the router.
The factory default settings for the router are:
IP Address
: 192.168.2.1
Subnet Mask:
255.255.255.0
5.
Select
Use the following DNS server addresses
.
a.
Enter the IP Address for the Preferred DNS Server. Example: 205.171.3.65
b.
Click
OK
.
6.
To close the Local Area Properties window, click
OK
.
7.
Close the Control Panel.
8.
Repeat these steps for each computer on your network.
