Multitech MultiMobile MT128ZLX-ST/NT, Quick Start Manual

Page: 14 / 39

MT128ZLX Quick Start 2 Windows 95 Install
10
Click OK . This installs the NDIS Application Program Interface and adds
ISDN-LINE0 and ISDN-LINE1 to the list of devices in Dial-Up
Networking .
At the Network screen (under the Configuration tab),
click OK .
19. The ISDN Configuration wizard begins.
NOTE: The information entered in the Microsoft ISDN Configuration
wizard does not affect the operation of the MT128ZLX. However,
completing this wizard is necessary to update certain dial-up
networking software components to add ISDN functionality to
Windows 95. The MT128ZLX is configured for use with the
Configuration Utility that was installed during driver installation. In
the section “Configuring the MT128ZLX” (presented later in this
chapter), you will supply setup information for using the
Configuration Utility program with your particular computer.
Click Next> .
20. Accept the default value for the “Switch Protocol.” Click Next> .
21. The next wizard screen requests Phone Number and SPID information.
It is not necessary to enter this information here. You will be asked to
supply this information later (in the
Configuration Utility program).
Leave the fields of this dialog box blank. Click Next> .
22. At the ‘completion’ screen, click Finish .
23. When prompted to restart your computer, click Yes .
24. Driver installation is now complete. However, before you can use your
MT128ZLX in Windows 95, it must be configured with SPIDs (in the U.S.
and Canada), telephone numbers, voice-encoding information, and
switch-type information. (See the procedure “Configuring the MT128ZLX
In Windows 95” in the User Guide, P/N S0000154.)