Software Installation
15-MultiMobile
administrator, or
b. run the \NWCLIENT\INSTALL.EXE used in
a previous Installation.
2. Answer
Yes
.
The program then modifies your AUTOEXEC.BAT
and CONFIG.SYS files accordingly and creates
backup copies. The following message appears:
Install support for MS Windows? (Y/N):
.
3. Answer accordingly and provide a path if necessary.
The program displays the following:
Configure your workstation for backup by a
NetWare server running software such as
BACKUP? (Y/N): No
4. Answer accordingly and provide a path if necessary.
5. Select a driver for your network board.
6. From the driver list, select
Other Drivers
.
7. Go to the Insert the Driver Disk dialog box and
specify the path where the ODI driver and INS files
reside. For example: C:\ODI.DOS.
8. Press
Enter
and select the target ODI driver.
9. Specify the drivers optional settings.
10. Press F10 to save to new configuration.
11. Highlight
Install press here
and press
Enter
to
install. The program copies the necessary files for
NetWare Client.
12. Continue the installation procedure to completion.
On completion, a new NET.CFG file is created in
your DOS directory. Typically, this file contains
the following lines:
Link Driver LE100ODI
#FRAME Ethernet_802.3
FRAME Ethernet_802.2
13.Copy the file LANEN.EXE from the directory
\ENABLER in the driver diskette to NetWare Cli-
ent directory.
14.Use a text editor to edit the STARTNET.BAT. Add
a running LANDEN command at the beginning of
All manuals and user guides at all-guides.com
