Hardware Installation
10-MultiMobile
2. Plug the 15 pin connector into the 15 pin socket of
the PC card. On the other end of the 15-pin cable,
leave the RJ-45 network cable exposed until the
LAN connection is made; hardware installation is
now complete. The MT10100ZLX/E is powered di-
rectly from the PC.
3. Connect the MT10100ZLX/E to the network (LAN)
using the bundled RJ-45 (8-pin) plug.
For operation in a 100Mbps (
100Base-TX
) Ethernet
network, a
Category 5
unshielded twisted pair (UTP)
cable should be used to connect between media cou-
pler and 100Mbps hub or switch.
For operation in a 10Mbps (
10Base-T
) Ethernet net-
work, a
Category 3
,
4
or
5
UTP cable could be used to
connect between the media coupler and a 10Mbps hub
or switch. Speak to your Network Administrator for
more details.
*
: Removal of the MT10100ZLX/E from a notebook
computer is contingent upon notebook computer design.
Please refer to PC Card removal instruction specific to
your notebook computer.
LED Functions
The
MT10100ZLX/E
has three LEDs (Figure 2-2) that
report Ethernet Link and Network status.
All manuals and user guides at all-guides.com
