REGULATORY INFORMATION
30
SocketModem
®
Cell MTSMC-MNG2 Device Guide
FCC Rule Part
Frequency Range
(MHz)
Output Watts
Frequency Tolerance
Emission
Designator
22H
824.0 - 849.0
0.230144
1.0 PM
172KG7W
Output power is conducted.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM
integrators.
The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers
and end users must be provided with antenna installation instructions and transmitter operating conditions and
instructions for satisfying RF exposure compliance.
The final product operating with this transmitter must include operating instructions and antenna installation
instructions, for end-users and installers to satisfy RF exposure compliance requirements.
The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure
requirements and the categorical exclusion requirements of 2.1091 is 0.6 for GPRS/EGPRS 850 and LTE FDD 5 and
26 frequency bands, 6.0dBi for LTE FDD 2 frequency band and 8.7 dBi for LTE FDD 4 frequency band.
Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be
evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and
concepts.
Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this
device into specific final products may require the submission of a Class II permissive change application containing
data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S.
operations.
EMC, Safety, and Radio Equipment Directive (RED) Compliance
The CE mark is affixed to this product to confirm compliance with the following European Community Directives:
Council Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical
and electronic equipment;
and
Council Directive 2014/53/EU on radio equipment and telecommunications terminal equipment and the
mutual recognition of their conformity.
MultiTech declares that this device is in compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU. The declaration of conformity may be requested at
.
Summary of Contents for MTSMC-MNG2
Page 1: ...SocketModem Cell MTSMC MNG2 Device Guide...
Page 5: ...CONTENTS SocketModem Cell MTSMC MNG2 Device Guide 5 Index 44...
Page 8: ...DIMENSIONS 8 SocketModem Cell MTSMC MNG2 Device Guide Chapter 2 Dimensions MTSMC MNG2...
Page 9: ...DIMENSIONS SocketModem Cell MTSMC MNG2 Device Guide 9 MTSMC MNG2 U...