CHAPTER 6 –APPLICATION NOTES
SocketModem CDMA MTSMC-C2 Device Guide
16
#915
FUMO – update fails with other reasons
#916
FUMO - Firmware Done, No firmware update
#919
FUMO - Firmware downloaded successfully
#920:
FUMO - Firmware download progress (percent)
#921
FUMO - Firmware download start
#921
FUMO - Firmware size get from the OMA-DM server (byte)
#929: 200
FUMO - Firmware Update Success
#929: 402
FUMO - Firmware corrupted , CRC error
#929: 403
FUMO - Firmware Package Mismatch
#929: 404
FUMO - Firmware Signature Failed
#929: 406
FUMO - Firmware update Authentication Failed
#929: 410
FUMO - Firmware update General Error
#930
FUMO - Firmware Reporting Firmware Update result to server
#DREL
FUMO - Firmware Data session release
Additional Network Initiated Alert Indications (NIA Retry)
#926
NIA - NIA retry start
#927
NIA - Notification Done with no NIFA information
#928
NIA - NIA digest mismatch error
OMA-DM COMMANDS
These commands are available after the unsolicited indication #900 appears, which means DM client is ready.
AT#OMADMSVADDR=<URL>
Set OMA-DM server address (default https://oma.ssprov.sprint.com/oma)
AT#OMADMSVADDR?
Read OMA-DM server address
AT#OMADMSVPORT=<port#>
Set OMA-DM server (default 443)
AT#OMADMSVPORT?
Read OMA-DM server
AT#OMADMPROXY=<port#>,<URL> Set OMA-DM proxy server port/URL (default
http://oma.ssprov.sprint.com:80)
AT#OMADLPROXY=<port#>,<URL> Set OMA-DL Proxy DL Server Port URL (default
http://oma.ssprov.sprint.com:80)
AT#OMADMCEN=<onoff>
Set OMA-DM Client feature; Disable=0, Enable=1
Important:
Never deploy devices with AT#OMADMCEN=0. Many OMA
commands result in error if OMADMCEN is set to 0.
AT#OMADMCEN?
Query the current OMA-DM client status
AT#OMADMCEN=?
Query OMA-DM available values
AT+OMADM=(onoff)
Set OMA-DM Client Initiated Device Configuration; Disable=0, Enable=1,
Initiate=2
AT+OMADM=?
Query OMA-DM Client Initiated Device setting
AT+PRL=<onoff>
Set OMA-DM CIPRL Session; Disable=0, Enable=1, Initiate=2
AT+PRL=?
Query OMA-DM CIPRL Session setting
AT+FUMO=
Set OMA-DM FUMO enable parameter; Disable=0, Enable=1, Initiate=2