manualshive.com logo in svg

Multitech MT2834BR, User Manual, Page: 80 / 90

Share
Download
Multitech MT2834BR User Manual Download Page 80

80

Appendix B

Flow Control

Xon/Xoff, Hardware RTS/CTS, ENQ/ACK,

Options

Unix-to-Unix Copy Protocol (UUCP) "Spoofing"

Mode of Operation

Full duplex over both dial-up lines and 2-wire
leased lines; automatic or manual dialing,
automatic or manual answer

Intelligent Features

Fully “AT command” compatible, micro-
processor controlled remote configuration, EIA
extended Automode, adaptive line probing,
automatic symbol rate and carrier frequency
during start-up, retrain and rate renegotiation,
autodial, redial, repeat dial, dial linking, pulse or
tone dial, dial pauses, call status display, auto-
parity and data rate selection, keyboard-
controlled modem options, non-volatile memory
and on-screen displays for modem option
parameters and up to ten telephone numbers/
command lines of up to 60 digits each, help
menus

Command Buffer

60 characters

Modulation

Trellis Coded Modulation (TCM) at 33600,
31200, 28800, 26400, 24000, 21600, 19200,
16800, 14400, 12000 and 9600 bps, Quadrature
Amplitude Modulation (QAM) at 9600 (non-
trellis), 4800 and 2400 bps, PSK at 1200 bps,
FSK at 300 bps

Fax Modulations

V.21CH2 FSK at 300 bps
V.27ter DPSK at 4800 and 2400 bps
V.29 QAM at 9600 and 7200 bps
V.17 TCM at 14400, 12000, 9600, and 7200 bps

Fax Carrier

V.21CH2 (Half Duplex)

Summary of Contents for MT2834BR



























































































Reviews:

No comments