15
Chapter 2 - Quick Start
Step 4: Install and Configure Your Software
You must have communications software installed in your computer to use
the MT1932ZDX. If you wish to use communications software that is
already installed, you should reconfigure it for the MT1932ZDX; otherwise,
install the data and fax communications software provided with the
MT1932ZDX (see software documentation for installation instructions).
Third Party Communications Software
1.
Turn on your computer and run your communications software.
2.
Find the dialog box or menu that lets you specify your modem. (In
Windows Terminal, select Settings, Modem Commands; in
HyperTerminal, select File, Properties, Phone Number; in ProComm
Plus for Windows, select Window, Setup, Advanced.)
3.
Choose the Multi-Tech MultiModemZDX or MT1932ZDX from the
software’s modem list. If the MultiModemZDX isn’t listed, choose
another Multi-Tech modem, such as the MultiModemII.
4.
Change the modem initialization string, if necessary. In most
circumstances, AT&FX4S0=0 works best for a PC, and
AT&FX4&E13&D0S0=0 works best for a Macintosh. For CompuServe,
include &E0&E14S7=60 in the string; if you use WinCIM, include &E5
for WinCIM’s software flow control. If you want the modem to always
answer the phone, delete S0=0 from the string. Depending on the
software, you may have to end the string with a carriage return (^M).
Note: To change the modem’s default initialization string, type the
new commands in the software’s terminal window, adding the
command &W0 to store it in the modem’s nonvolatile memory; e.g.,
AT&FX4S0=0&W0.
5.
Select the port the modem is connected to (normally COM1 or
COM2).
Summary of Contents for MT1932ZDX
Page 1: ...Quick Reference Guide...
