Multitech MR4800E, Owner'S Manual

Page: 44 / 64

MR4800E Owner’s Manual
44
rm
See del.
rs
See reset.
se, setenviron
Parameters: None
Description: Change the environment values for the MR4800E. The se command allows you to
check or change the environment values for the MR4800E. The IP Address, default Trap IP,
Gateway IP, Subnet Mask, and community strings may be changed.
Security:Supervisor
Example:
[0] A:\MMM # se
MultiModemManager MR4800E Environment setup
Use '-' to back up to the previous command.
The default value is in angle brackets <>.
The current time is: 11:04pm
Enter the new time:
<cr>
1
The current date is: 10/30/1996
Enter the new date: mm/dd/yy
<cr>
1
Enter MR4800E IP Address <199.199.99.9>: <cr> 1
Enter Default Trap IP Address <199.199.99.91>: <cr>
1
Enter Gateway IP Address <0.0.0.0>: <cr> 1
Enter Subnet Mask <255.255.255.0>: -
2
Enter Gateway IP Address <0.0.0.0> : <cr>
1
Enter Subnet Mask <255.255.255.0> : <cr>
1
Enter read community string <public> : <cr>
1
Enter write community string <public> : <cr>
1
IP Address = 192.168.4.44
Trap IP Address = 192.168.4.6
No gateway IP address is currently stored.
Subnet mask = 255.255.255.0
Read community = public
Write community = public
Enter SETENVIRON to change these settings
[1] A:\MMM #
Foot Notes:
1 Press Enter (<cr>) to accept the current value.
2
Press hyphen (-) to go back to the previous command.
3
Entered an invalid IP Address.