Multitech ISI4604-PCI, User Manual

Page: 37 / 70

37
Chapter 3—Software/Driver Installation
f:\system\aio\directory . Click Yes to overwrite the existing
aiomdms.mdc file.
Configuring Ports for NetWare Connect
When the driver is installed, it will allocate consecutive ports for the
ISI card as follows:
• 8 consecutive ports for the ISI4608-PCI.
• 4 consecutive ports for the ISI4604-PCI.
To set up NetWare Connect ports, enter
LOAD NWCCON
at the
NetWare console prompt. LOAD NWCCON opens the NetWare
Connect Configuration Utility. Select the appropriate menu options
(modem type, speed, flow control, etc.).
Removing the Driver (Novell)
In Novell, remove file AIOISIX.NLM from the system directory and
make the appropriate changes to the Autoexec.ncf file.
SCO Open Server 5 Driver Installation
The ISI driver for SCO Open Server 5 is shipped on CD-ROM (FAT file
system) and can also be downloaded from the Multi-Tech web site. In
both cases, the driver files are compressed (“tarred”). Users installing
from the CD-ROM should begin at “To install from CD-ROM” directly
below. Users installing from a floppy disk should skip down to “To
install driver from floppy disk” later in this section. The filename of the
SCO5 driver in its tarred form is isisco.tar .
This present installation section is task-oriented with minimal
explanation of procedural steps. The section Multi-Tech Installation
Script, which immediately follows this section, presents additional
details to aid in installation.
To install from CD-ROM:
# mount -r /dev/cd0 /mnt
All manuals and user guides at all-guides.com