Chapter 3- BIOS Setup
Multi-Tech Systems, Inc. Single Board Computer IAC-F696 User’s Guide (S000349A)
28
Standard CMOS Setup
When you select the STANDARD CMOS SETUP on the main program, the screen display will appears as:
Standard CMOS Setup Screen
Phoenix - Award BIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy)
Fri, Oct 24, 2003
Item Help
Time (hh:mm:ss)
13 : 29 : 45
Menu Level
f
f
IDE Primary Master
[None]
f
IDE Primary Slave
[None]
f
IDE Secondary Master
[None]
f
IDE Secondary Slave
[None]
Drive A
[1.44M, 3.5 in.]
Drive B
[None]
Halt On
[All, But Disk/Key]
Base Memory
640K
Extended Memory
63488K
Total Memory
64512K
Change the day,
month, year and
century
Ç
È
Æ
³
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
The Standard CMOS Setup utility is used to configure the following components such as date, time, hard disk
drive, floppy drive, display and memory. Once a field is highlighted, on-line help information is displayed in
the left bottom of the Menu screen.
Set Date: Month, Date, Year
Set Time: Hour, Minute and Second. Use 24-hour clock format (for p.m. time, add 12 to the hour number,
e.g. you would enter 4:30 p.m. as 16:30) Primary Master / Primary Slave.
Primary Master/Primary Slave
Secondary Master / Secondary Slave: Press PgUp / <+> or PgDn / <-> to select Manual, None, Auto
type. Note that the specifications of your drive must match with the drive table. The hard disk will not
work properly if you enter improper information for this category. If your hard disk drive type is not
matched or listed, you can use Manual to define your own drive type manually
.
If you select Manual, related information is asked to be entered to the following items. Enter the
information directly from the keyboard. This information should be provided in the documentation from
your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be
[None]
If the controller of HDD interface is CD-ROM, the selection shall be
[None]
