Multitech Conduit IP67 200 Series, Hardware Manual

Page: 12 / 28

SPECIFICATIONS AND RELATED INFORMATION
12 Conduit
®
IP67 Series 200 Base Station MTCDTIP2 Hardware Guide
Voltage Power Down
Mode via
Radio
Command Cellular Call
Box
Connection
(No Data) Average
Measured
Current at
Max Power TS Pulse
Average Peak
Current for
HSDPA/ LTE Total Inrush
Charge
measured in
MilliCoulombs Total Inrush
Charge
DURATION
during
Powerup
(INRUSH
Duration)
57VDC POE 41 mA 41 mA 153 mA 272 mA 1.06 mC 8.0 mS
EGSM (900 MHz)
37VDC POE 46 mA 52 mA 158 mA 2.6 A 1.16 mC 8.98 mS
57VDC POE 36 mA 41 mA 110 mA 1.62 A 1.06 mC 8.0 mS
Ethernet Models
Note:
Multi-Tech Systems, Inc. recommends that you incorporate a 10% buffer into the power source
when determining product load.
Maximum Power: The continuous current during maximum data rate with the LoRa at maximum
power setting.
Tx Pulse: The average peak current during LoRa transmission.
Inrush Charge: The total inrush charge at power on.
Voltage Idle Measure Average
Measured
Current at Max
Power TS Pulse Average
Peak Current for
HSDPA/ LTE Total Inrush
Charge measured
in MilliCoulombs Total Inrush
Charge
DURATION
during Powerup
(INRUSH
Duration0
37VDC POE 49 mA 96 mA 260 mA 0.818 mC 7.61 mS
57VDC POE 34 mA 71 mA 140 mA 0.962 mC 7.70 mS