MultiTable ModDesk Pro-L Electric L-Shaped Standing Desk Assembly Manual Download Page 7

 

 

2.8 Specific dangers 

• 

When adjusting the height of the frame there is danger of injury. Make sure that 

there is no-one else in the immediate surroundings of the frame. 

• 

When assembling the workstation frame, make sure there is ample space to avoid 

collisions (i.e. inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) 

in all imaginable directions. 

• 

Make sure there is ample space to avoid collisions if there are objects on the work 

surface such as computers or computer peripherals.  

• 

Make sure there is clearance of at least 1” from all other furniture, all around the 

workstation frame. 

 

2.9 In an emergency 

• 

Stop using the workstation frame at once if you notice anything unusual (strange 
sounds etc.). 

• 

Have the workstation frame repaired by specialists. Refrain from using the work-

station frame until it has been successfully repaired. 

 

2.10 Maintenance and upkeep 

• 

The workstation frame and its components are low-maintenance items and need no 

special regular maintenance. 

• 

Do not perform any repairs on the work surface or other components yourself. 

• 

Do not alter the construction of the work surface or its frame. 

• 

Any faulty components removed must be replaced with new, original components 
from the manufacturer. Use only original replacement parts made by the manufactur-

er. Have any such work carried out by a specialist, making reference to this Assem-
bly/operating manual. 

 

2.11 Cleaning 

• 

Dust the workstation frame once a week with a dry cloth. 

• 

Clean the workstation frame with a damp cloth and a weak solution of cleaner once a 
fortnight. 

 

2.12 Persistent risks 

This workstation frame has been built to the state of the art and to recognized safety 

regulations. Nonetheless, its use may constitute a risk to the health and safety of users 
or third parties, damage to the workstation frame or to other items. The workstation 

frame must be used only: 

• 

for the purpose for which it was intended. 

• 

if it is completely safe so to do.  

Summary of Contents for ModDesk Pro-L Electric L-Shaped Standing Desk

























Reviews: