18
3.4.13 Note: Mounting the table top
Center tops over bases, align with predrilled holes, and attach with wood screws (50 total).
17
Mount the wire clips for cable. Peel off paper backing and stick to table top.
Place wire into each wire clip.
3.4.15 Mounting wire clip
3.4.16 Clearance around the wall or moving parts 1” of the table top
Allow a minimum clearance of 1“ from the edge of a table top to a wall
or moving parts.
17
•
Lay the Table Tops over the Base.
•
First, attach both Table Tops together with
the
table top brackets
and the 8
table top screws
.
•
Then, align the pre-drilled holes in the Table Top
assembly over the Base. If the alignment does not suite
your placement needs, then adjust the table top
assembly to meet your preference.
•
Attach the Table Top assembly to the Base with 38
table top screws
(Part D).
16
3.4.14 Note: Mounting the power supply underneath the table top
Mount control unit in-between the center crossbars of the first two legs.
Summary of Contents for ModDesk Pro-L Electric L-Shaped Standing Desk
