Page 14 |
ModTable
|
vs 5.0
3.4.10 Base Test
15
In Photo 15:
Turn the handle until the base reaches the highest position and then back down.
Observe the provisions of Section 2 Safety Information on page 4, in
particular:
Do not leave children unsupervised with the ModTable. Children may be
unaware of the dangers presented by the table movement.
Do not continue to turn the handle past the stopping point. Doing
so will result in damage to the ModTable.
Make sure that the height adjustment can be operated undisturbed.
Keep the base away from possible obstacles, and space the ModTable at
least a half of an inch away from possible obstructions (for instance, the
wall).
3.4.9 Table Top Assembly
#
Part Name
Qty
17 Table top screws
10
Important!
If you have purchased the Wheel Kit, please skip this section. Continue to the Wheel Kit
Assembly Manual now.
Slide
handle
out of handle bracket, and set aside.
With the assistance of another person, lay table top upside down on the a soft surface, and
carefully turn the Base over (upside down), setting it on top of the table top.
Align the holes in the Base with the holes in the table top. Attach the Base to the table top with
10
table top screws
. The
left top support
and
right top support
attach to the table top
with 3
table top screws each
. Use 4 table
top screws
to attach the center/middle of the
Base.
With the assistance of another person, carefully turn the Base and attached table top back over
to its upright position. Slide the
handle
back into the
handle bracket.