Multistore C06 PRT 1 Series Assembly Instruction Download Page 4

Page: 4 / 4

PICTURE OF YOUR FINISHED DRAWER

STEP 3.

USING THE HANDLE SCREW ATTACHED THE HANDLE TO THE BACK OF THE DRAWER FRONT

INTO THE PREDRILLED HOLES ALLREADY PROVIDED.

DRAWER ASSEMBLY

STEP 4.

PLACE YOUR DRAWER RUNNER ON THE BOTTOM OF THE

DRAWER MAKING SURE THE WHEEL IS TO THE BACK OF THE

DRAWER SIDE, USING 2 OF THE 5/8 SCREWS, FIX INTO

YOUR DRAWER FRONT AND BACK OF THE RUNNER, NOW

REPEAT FOR THE

Summary of Contents for C06 PRT 1 Series

Page 1: ...CAPS 14 3 BACKING NAILS 50 NO MODEL DESCRIPTION QTY 5 16mm PAN HEAD SCREWS 1 6 25mm PAN HEAD SCREWS 1 7 L SAFETY BRACKET 1 When attaching unit to wall put safety bracket in middle of unit with 16mm pan head screw then 25mm pan head screw into wall For plasterboard without a stud it is recommended to use a plug with screw not provided F ...

Page 3: ...FRONT DRAWER AND PLACE YOUR DOWELS CAM PIN IN THE PRE DRILLED HOLES ON EITHER SIDE AS INSTRUCTED BELOW NO MODEL DESCRIPTION QTY 1 CONFIRMAT SCREWS 20 2 DOWELS 20 3 BACKING NAILS 100 4 5 8 X 6 WOOD SCREWS 30 5 HANDLES 5 NO MODEL DESCRIPTION QTY 6 CAMS 10 7 CAM PINS 10 8 60mm 8 GAUGE INFILL SCREW 3 9 EURO SCREWS 20 10 INFILL 55mm 1 PART 2 OF 2 ...

Page 4: ...CK OF THE DRAWER FRONT INTO THE PREDRILLED HOLES ALLREADY PROVIDED DRAWER ASSEMBLY STEP 4 PLACE YOUR DRAWER RUNNER ON THE BOTTOM OF THE DRAWER MAKING SURE THE WHEEL IS TO THE BACK OF THE DRAWER SIDE USING 2 OF THE 5 8 SCREWS FIX INTO YOUR DRAWER FRONT AND BACK OF THE RUNNER NOW REPEAT FOR THE ...