Multistore C06 PRT 1 Series Assembly Instruction Download Page 3

Page: 3 / 4

HOW TO ASSEMBLE YOUR 5

—

DRAWER

STEP 1.

LAYOUT YOUR DRAWER PIECES FLAT AS PER DESIGN WITH PRE

DRILLED HOLES FACING UP.

START WITH THE BACK OF THE FRONT DRAWER AND PLACE YOUR DOWELS & CAM PIN IN THE

PRE

DRILLED HOLES ON EITHER SIDE AS INSTRUCTED BELOW.

MODEL

DESCRIPTION

QTY

CONFIRMAT SCREWS

DOWELS

BACKING NAILS

100

5/8 X 6 WOOD SCREWS

HANDLES

MODEL

DESCRIPTION

QTY

CAMS

CAM PINS

60mm 8 GAUGE INFILL SCREW

EURO SCREWS

INFILL 55mm

PART 2 OF 2

Summary of Contents for C06 PRT 1 Series

Page 1: ...CAPS 14 3 BACKING NAILS 50 NO MODEL DESCRIPTION QTY 5 16mm PAN HEAD SCREWS 1 6 25mm PAN HEAD SCREWS 1 7 L SAFETY BRACKET 1 When attaching unit to wall put safety bracket in middle of unit with 16mm pan head screw then 25mm pan head screw into wall For plasterboard without a stud it is recommended to use a plug with screw not provided F ...

Page 3: ...FRONT DRAWER AND PLACE YOUR DOWELS CAM PIN IN THE PRE DRILLED HOLES ON EITHER SIDE AS INSTRUCTED BELOW NO MODEL DESCRIPTION QTY 1 CONFIRMAT SCREWS 20 2 DOWELS 20 3 BACKING NAILS 100 4 5 8 X 6 WOOD SCREWS 30 5 HANDLES 5 NO MODEL DESCRIPTION QTY 6 CAMS 10 7 CAM PINS 10 8 60mm 8 GAUGE INFILL SCREW 3 9 EURO SCREWS 20 10 INFILL 55mm 1 PART 2 OF 2 ...

Page 4: ...CK OF THE DRAWER FRONT INTO THE PREDRILLED HOLES ALLREADY PROVIDED DRAWER ASSEMBLY STEP 4 PLACE YOUR DRAWER RUNNER ON THE BOTTOM OF THE DRAWER MAKING SURE THE WHEEL IS TO THE BACK OF THE DRAWER SIDE USING 2 OF THE 5 8 SCREWS FIX INTO YOUR DRAWER FRONT AND BACK OF THE RUNNER NOW REPEAT FOR THE ...