Note:
How to Set the Delay ON/ Delay off, Over Count/ W.Over Count,
Speed Selection
1). Unitial Press Reset Key then turn ON instrument.
2). When display will be blinking, then do required change by using thumbwheel switch.
1
Delay
OFF
Delay
ON
0
+
-
Over
Count
No over
Count
1
0
-
+
Memory
YES
Memory
NO
1
0
-
+
Low
Speed
High
Speed
1
0
-
+
RESET
1). Count can be set by Thumb Wheel Switch .
2). If yor set TIME=00.0 SECOND then it will be in MANUAL MODE and if you set
TIME=0.01 To 99.9 SECONDS then it will be in AUTO RESET MODE.
3). At set Count Relay will turn ON and RED LED will turn on right hand side.
4). Relay remain on until AUTO RESET TIME is over.
5). If you set TIME 00.0 seconds then Relay will remains in on condition until Reset key
is pressed.
6). To reset the count press key for 2 seconds.
Working
Page - 2
www.multispanindia.com
TWS 1400F
