MultiSound Micro-Lit24, User Manual

Page: 26 / 36

MICRO-LIT24
26
chargIng thE battEry
The integrated battery is supplied with a 70% maintenance charge
and must be fully charged before use.
Use only the supplied battery charger to charge the
battery.
Battery chargers not approved by the manufacturer
could irreparably damage the batteries or cause fires.
Incorrect connection of the battery charger can seri-
ously damage the device. Damages caused by misuse
are not covered by warranty.
Proceed as follows to charge the MICRO-LIT24 battery:
1. Insert the battery charger into the connector as shown.
2. Connect the battery charger to a standard 220V power socket.
The red LED on the side of the device turns on to indi-
cate the charging status, when the battery charger is
correctly connected.
The red LED turns off when the battery is fully charged.
3. Disconnect the battery charger from the device and then from the
220V power socket.