Set the time for morning comfort temperature. Symbol
Confirm with OK.
Set the desired temperature. Confirm with OK.
Set the time for daytime economy temperature. Symbol
Confirm with OK.
Set the desired temperature. Confirm with OK.
Set the time for afternoon comfort temperature. Symbol
Confirm with OK.
Set the desired temperature. Confirm with OK.
Set the time for nighttime economy temperature. Symbol
Confirm with OK.
Set the desired temperature. Confirm with OK.
Set the time for weekend comfort temperature. Symbol
Confirm with OK.
Set the desired temperature. Confirm with OK.
Set the time for weekend economy temperature. Symbol
Confirm with OK.
Set the desired temperature. Confirm with OK.
The thermostat automatically leaves programming mode after
10 seconds. Alternatively, you can switch the thermostat off and
back on. The settings are stored automatically.
SETBACK MODE
Setting the temperature
Press down the OK button for 5 sec. Press the right selector
button twice. The symbol
appears in the display.
Confirm with OK.
Set the desired temperature. Confirm with OK.
Manual activation of setback mode
Hold down OK and right selector button for 5 sec. The symbol
appears in the display. Deactivation is done in the same way.
External activation of setback mode
Activation via a relay and/or a GSM-module connected via the
S and L clamps at the back.
Choosing sensor mode
Press the OK button for 5 seconds. Press the right selection
button 3 times. The symbol
is shown in the display.
Confirm with OK.
Set the desired sensor type.
A = Room sensor
F = Floor sensor
AF = A combination of floor sensor/room sensor
P = Power regulator
Confirm with OK.
(The F and AF choices are only valid if a floor sensor is
connected to clamps 4+5.)
If AF mode is chosen, the Min and Max temperature must be
confirmed. The preset values are Min=10°C and Max=27°C.
Confirm with OK.