PAGE 24 — DCA-45USI — OPERATION AND PARTS MANUAL (STD) — REV. #2 (04/22/05)
Output Terminal Familiarization
The “
Output Terminal Panel
” (Figure 7) is provided with the
following:
z
Three (3) 120/240V output receptacles, 50 amp
z
Three (3) Circuit Breakers 240V @50 amps
z
Two (2) 120V GFCI receptacles, 20 amp
z
Two (2) GFCI Circuit Breakers @ 20 amps
z
One Main Circuit Breaker @110 amps
z
Five (5) Output Terminal Lugs ( U, V, W, O, Ground)
Output Terminal Panel
The
Output Terminal Panel
(Figure 7) shown below is located
on the right-hand side (left from control panel) of the generator.
Lift up on the cover to gain access to receptacles and terminal
lugs.
Terminal legs “
O
” and “
Ground
” are
considered
bonded grounds
.
Figure 7. Output Terminal Panel
DCA-45USI — OUTPUT TERMINAL PANEL FAMILIARIZATION
NOTE
