![background image](http://html1.mh-extra.com/html/multiquip/mp1415e/mp1415e_operation-and-parts-manual_1855314009.webp)
MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10) — PAGE 9
BLADE SAFETY
■
Use appropriate blades manufactured for use on masonry
saws.
■
Always inspect blades before each
use. The blade should exhibit no
cracks, dings, or flaws in the steel
centered core and/or rim. Center
(arbor) hole must be undamaged and
true.
■
Examine blade flanges for damage, excessive wear and
cleanliness before mounting blade. Blade should fit snugly
on the shaft and against the inside/outside blade flanges.
■
Ensure the blade is marked with an operating speed greater
than the blade shaft speed of the saw.
■
Only cut the material that is specified by the blade. Read the
specifications of the blade to ensure the proper tool has been
matched to the material being cut.
■
Always keep blade guards in place.
Exposure of the blade must not
exceed 180 degrees.
■
NEVER
touch or try to stop a moving
blade with your hands.
ALWAYS
keep hands clear of the blade.
■
Ensure that the blade does not come
into contact with the ground or surface
during transportation.
DO NOT
drop the blade on ground or
surface.
■
The engine governor is designed to permit maximum engine
speed in a no-load condition. Speeds that exceed this limit
may cause the blade to exceed the maximum safe allowable
speed.
■
Ensure that the blade is mounted for proper operating
direction.
■
Keep all inexperienced and unauthorized people away from
the equipment at all times.
■
ALWAYS
use or operate the saw on a level surface to prevent
the saw from tipping.
GENERAL SAFETY
■
ALWAYS
read, understand, and follow procedures in
Operator's Manual before attempting to operate equipment.
■
ALWAYS
be sure the operator is familiar with proper safety
precautions and operating techniques before using the saw.
■
NEVER
leave the machine
unattended
while running.
■
Block the unit when leaving or when using on a slope.
■
ALWAYS
check to make sure that the operating area is clear
before starting the engine.
■
Maintain this equipment in a safe operating condition at all
times.
■
AVOID
wearing jewelry or loose fitting clothing that may snag
on the controls or moving parts, this can cause a serious
injury.
■
ALWAYS
keep clear of
rotating
or
moving parts
while
operating or the saw.
■
ALWAYS
store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of
the reach of children.
■
NEVER
use accessories or attachments which are not
recommended by the manufacturer for this equipment.
Damage to the equipment and/or injury to user may result.
WARNING
■
ALWAYS
check to make sure that the
operating area is clear before starting the
engine.
WARNING
SAFETY - ELECTRIC POWERED MODELS
■
ALWAYS
connect the motor to a power source in compliance
with all local electrical codes. This must be performed by a
qualified electrician.
■
ALWAYS
use only outdoor approved
GROUNDED
extension
cords.
■
MAKE CERTAIN
the power cord/extension cord is free from
damage and that the grounding circuit is operational.
■
MAKE CERTAIN
the extension cord used is intended to be
used in the environment you will be using it in. If an extension
is used,
NEVER
submerge the connection in water. To reduce
the risk of electrical shock, always make water-tight
connections.
■
MAKE CERTAIN
the "
ON/OFF
" switch is in the "
OFF
" position
before plugging in the power cord/extension cord to avoid
accidental starting.
■
ALWAYS
stop the motor before servicing.
MAKE CERTAIN
the motor is stopped and turned
"OFF"
at the switch, and the
power cord is disconnected from the power source.
■
Use only the guage wire and length of cord recommended
for the motor size.
■
When cutting,
ALWAYS
be aware of the location of the cord.
RULES FOR SAFE OPERATION
Summary of Contents for MP1415E
