background image

PAGE 8 —MIX N' GO MIXER — PARTS & OPERATION MANUAL — REV. #1 (09/09/02)

RULES FOR SAFE OPERATION

ALWAYS

 refuel in a well-ventilated area, away from sparks

and open flames.

ALWAYS

 use extreme caution when working with 

flammable

liquids. When refueling, 

stop the 

engine and allow it to cool.

DO NOT

 smoke around or near the machine. Fire or explosion

could result from fuel vapors, or if fuel is spilled on a hot
engine.

NEVER

 operate the mixer in an explosive

atmosphere or near combustible
materials. An explosion or fire could result
causing severe 

bodily harm or even

death

.

Topping-off to filler port is dangerous, as it tends to spill fuel.

Refer to the 

Engine Owner's Manual

 for engine technical

questions or information.

NEVER

 use accessories or attachments, which are not

recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.

Manufacturer does not assume responsibility for any accident
due to equipment modifications.

NEVER

 touch the hot exhaust manifold,

muffler or cylinder. Allow these parts to
cool before servicing engine or mixer.

The engine of this mixer requires an adequate free flow of
cooling air.

 NEVER! 

operate the roller mixer in any enclosed

or narrow area where free flow of the air is restricted. If the air

flow is restricted it will cause
serious damage to the
mixer or engine and may

cause injury to people and
property. Remember the
mixer's  engine  (gasoline

models only) gives off

DEADLY 

 gases.

High Temperatures

 – Allow the engine to cool before adding

fuel or performing service and maintenance functions. Contact
with 

hot components can cause serious burns.

DANGER:

Failure to follow instructions in this manual may
lead to serious injury or even death! This

equipment is to be operated by trained and
qualified personnel only! This equipment is for
industrial use only.

The following safety guidelines should always be used when
operating the Mix N' Go Mixer:

GENERAL SAFETY

DO NOT 

operate or service this equipment before

reading this entire manual.

This equipment should not be operated by
persons under 18 years of age.

NEVER

 operate this equipment without proper

protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job.

NEVER

 operate this equipment when not feeling

well due to fatigue,  illness or  taking medicine.

NEVER

 operate this equipment under the

influence or drugs or alcohol.

Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.

ALWAYS

 check the machine for loosened  threads or bolts

before starting.

ALWAYS

 wear proper respiratory (mask) hearing and eye

protection equipment when operating the mixer.

Summary of Contents for MIX N' GO









































































Reviews: