background image

page 62 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) 

terMs and COnditiOns Of sale — parts

payMenT TeRMs

Terms of payment for parts are net 30 days.

fReigHT poliCy

All  parts  orders  will  be  shipped  collect  or 

prepaid with the charges added to the invoice. 

All  shipments  are  F.O.B.  point  of  origin. 

Multiquip’s  responsibility  ceases  when  a 

signed manifest has been obtained from the 

carrier, and any claim for shortage or damage 

must be settled between the consignee and 

the carrier.

MiniMuM oRdeR

The minimum charge for orders from Multiquip 

is  $15.00  net.  Customers  will  be  asked  for 

instructions regarding handling of orders not 

meeting this requirement.

ReTuRned goods poliCy

Return  shipments  will  be  accepted  and 

credit will be allowed, subject to the following 

provisions:

1.  A  Returned  Material  Authorization 

must be approved by Multiquip prior to 

shipment. 

2.  To obtain a Return Material Authorization, 

a  list  must  be  provided  to  Multiquip 

Parts Sales that defi nes item numbers, 

quantities, and descriptions of the items 

to be returned.
a.  The parts numbers and descriptions 

must match the current parts price 

list.

b.  The list must be typed or computer 

generated.

c.  The  list  must  state  the  reason(s) 

for the return.

d.  The  list  must  reference  the  sales 

order(s)  or  invoice (s)  under 

which  the  items  were  originally 

purchased.

e.  The  list  must  include  the  name 

and  phone  number  of  the  person 

requesting the RMA.

3.  A copy of the Return Material Authorization 

must accompany the return shipment.

4.  Freight is at the sender’s expense. All 

parts must be returned freight prepaid to 

Multiquip’s designated receiving point.

5.  Parts  must  be  in  new  and  resalable 

condition,  in  the  original  Multiquip 

package (if any), and with Multiquip part 

numbers clearly marked.

6.  The following items are not returnable:

a.  Obsolete parts. (If an item is in the 

price  book  and  shows  as  being 

replaced  by  another  item,  it  is 

obsolete.)

b.  Any  parts  with  a  limited  shelf  life 

(such as gaskets, seals, “O” rings, 

and other rubber parts) that were 

purchased  more  than  six  months 

prior to the return date.

c.  Any  line  item  with  an  extended 

dealer  net  price  of  less  than 

$5.00.

d.  Special order items.
e.  Electrical components.
f.  Paint, chemicals, and lubricants.
g.  Decals and paper products.
h.  Items purchased in kits.

7.  The sender will be notifi ed of any material 

received that is not acceptable.

8.  Such  material  will  be  held  for  five 

working days from notifi cation, pending 

instructions.  If  a  reply  is  not  received 

within  five  days,  the  material  will  be 

returned to the sender at his expense.

9.  Credit on returned parts will be issued 

at dealer net price at time of the original 

purchase,  less  a  15%  restocking 

charge.

10.  In cases where an item is accepted, for 

which the original purchase document 

can not be determined, the price will be 

based on the list price that was effective 

twelve months prior to the RMA date.

11.  Credit  issued  will  be  applied  to  future 

purchases only.

pRiCing and RebaTes

Prices  are  subject  to  change  without  prior 

notice.  Price  changes  are  effective  on  a 

specifi c  date  and  all  orders  received  on  or 

after that date will be billed at the revised price. 

Rebates for price declines and added charges 

for price increases will not be made for stock 

on hand at the time of any price change.

Multiquip  reserves  the  right  to  quote  and 

sell  direct  to  Government  agencies,  and  to 

Original  Equipment  Manufacturer  accounts 

who use our products as integral parts of their 

own products.

speCial eXpediTing seRviCe

A  $35.00  surcharge  will  be  added  to  the 

invoice  for  special  handling  including  bus 

shipments,  insured  parcel  post  or  in  cases 

where Multiquip must personally deliver the 

parts to the carrier.

liMiTaTions of selleR’s liabiliTy

Multiquip  shall  not  be  liable  hereunder  for 

damages in excess of the purchase price of 

the item with respect to which damages are 

claimed, and in no event shall Multiquip be 

liable for loss of profi t or good will or for any 

other  special,  consequential  or  incidental 

damages.

liMiTaTion of WaRRanTies

No  warranties,  express  or  implied,  are 

made in connection with the sale of parts or 

trade accessories nor as to any engine not 

manufactured by Multiquip. Such warranties 

made  in  connection  with  the  sale  of  new, 

complete  units  are  made  exclusively  by  a 

statement  of  warranty  packaged  with  such 

units,  and  Multiquip  neither  assumes  nor 

authorizes  any  person  to  assume  for  it 

any  other  obligation  or  liability  whatever  in 

connection with the sale of its products. Apart 

from  such  written  statement  of  warranty, 

there are no warranties, express, implied or 

statutory, which extend beyond the description 

of the products on the face hereof.

Effective:  February 22, 2006

Summary of Contents for Mikasa Series

































































Reviews: