![background image](http://html1.mh-extra.com/html/multiquip/mikasa-mvh508dz/mikasa-mvh508dz_operation-and-parts-manual_1855304026.webp)
PAGE 26 — MVH508DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (04/04/14)
MAINTENANCE
MACHINE INSPECTION
Perform machine inspection as listed in Table 6.
Table 6. Machine Inspection
Interval
Check
Solution
Daily Before Starting
Machine
Clean if necessary.
Fuel Tank For Leaks
Repair fuel leaks.
Fuel System for Leaks
Repair fuel leaks.
Engine Oil
Add oil if necessary.
Vibrator Oil
Add oil if necessary.
Air Cleaner Element
Clean/Replace
Guard Frame
Inspect/deformations
Shock Absorber
Replace if damaged.
Hydraulic pump
Check/Repair Leaks
Hydraulic Pipe System
Check/Repair leaks,
Inspect for wear
Direction Control Lever
Check bolts/nuts,
Inspect for wear
Duct Hose
Check for crack/
damage
Every 20 Hours
Engine Oil/Oil Filter
Replace only after
first 20 hrs.
Every 100 Hours
Engine Oil
Change
Engine Oil Filter
Wash
Vibrator Oil
Check oil level.
Check for leaks/dirt.
Hydraulic Oil
Check oil level.
Check for leaks.
Battery Terminal
Clean
Every 200 hours
V-Belt
Inspect, replace if
damaged or worn.
Clutch
Inspect, replace if not
working properly.
Engine Bolts
Replace bolts
if deformed or
elongated.
Every 300 hours
Vibrator Oil
Change
Fuel Filter
Change
Hydraulic Oil
Change
Engine Oil Filter
Change
Every 2 years
Fuel Lines
Replace
TIGHTENING TORQUE
Reference Table 7 below (Tightening Torque ), for retight-
ening of nuts and bolts.
ENGINE AIR CLEANER
This engine is equipped with a replaceable, high-density
paper air cleaner element. See (Figure 21) for air cleaner
components.
1. Remove the air cleaner cover and foam filter element.
2. Tap the paper filter element several times on a hard
surface to remove dirt, or blow compressed air not
exceeding 30 psi (207 kPa, 2.1 kgf/cm
2
) through the
filter element from the inside out.
NEVER
brush off
dirt. Brushing will force dirt into the fibers. Replace the
paper filter element if it is excessively dirty.
Table 7. Tightening Torque (in. kg/cm Diameter)
Material
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
4T
70
150
300
500
750
1,100
1,400
2,000
6-8T
100
250
500
800
1,300
2,000
2,700
3,800
11T
150
400
800
1,200
2,000
2,900
4,200
5,600
*
100 (6mm) 300 ~ 350 (8mm) 650 ~ 700 (10mm)
**
In case counter-part is of aluminum
Bolt threads used with this machine are all right handed
Material and quality of material is marked on each bolt, and screw.
DANGER
DO NOT
use gasoline or low flash point
solvents for cleaning the air cleaner. The
possibility exists of fire or explosion which
can cause damage to the equipment and
severe bodily harm or even
DEATH
!
CAUTION
Wear protective equipment such as
approved safety glasses or face shields
and dust masks or respirators when
cleaning air filters with compressed air.