![background image](http://html1.mh-extra.com/html/multiquip/mikasa-mt55-f/mikasa-mt55-f_operation-manual_1855283008.webp)
PAGE 8 — MT55-F — PARTS & OPERATION MANUAL — REV. #0 (07/03/02)
MT55-F — RULES FOR SAFE OPERATION
CAUTION:
Failure to follow instructions in this manual
may lead to serious injury or even death!
This equipment is to be operated by trained
and qualified personnel only! This
equipment is for industrial use only.
The following safety guidelines should always be used when
operating the MT55-F Tamping Rammer:
GENERAL SAFETY
■
DO NOT operate or service this equipment before
reading this entire manual.
■
This equipment should not be operated by
persons under 18 years of age.
■
NEVER operate this equipment without proper
protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job.
■
NEVER operate this equipment when not
feeling well due to fatigue, illness or taking
medicine.
■
NEVER operate this equipment under the
influence or drugs or alcohol.
■
ALWAYS check the machine for loosened threads or bolts
before starting.
■
ALWAYS wear proper respiratory (mask), hearing and eye
protection equipment when operating the rammer.
■
ALWAYS refuel in a well-ventilated area, away from sparks
and open flames.
■
ALWAYS use extreme caution when working with flammable
liquids. When refueling, stop the engine and allow it to cool.
DO NOT smoke around or near the machine. Fire or explosion
could result from fuel vapors, or if fuel is spilled on a hot
engine.
■
NEVER operate the rammer in an explosive atmosphere or
near combustible materials. An explosion or fire could result
causing severe
bodily harm or even death.
■
Topping-off to filler port is dangerous, as it tends to spill fuel.
■
The engine section of this rammer requires an adequate free
flow of cooling air. NEVER
operate the rammer in any
enclosed or narrow area
where free flow of the air is
restricted. If the air flow is
restricted it will cause
serious damage to the
rammer or engine and
may cause injury to
people. Remember the
rammer's engine gives off
DEADLY carbon monoxide gas.
■
High Temperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with
hot components can cause serious burns.
■
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
■
NEVER touch the hot exhaust
manifold, muffler or cylinder. Allow
these parts to cool before servicing
engine or rammer.
■
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
■
Manufacture does not assume responsibility for any accident
due to equipment modifications.
Summary of Contents for mikasa mt55-f
Page 2: ...PAGE 2 MT55 F PARTS OPERATION MANUAL REV 0 07 03 02...
Page 10: ...PAGE 10 MT55 F PARTS OPERATION MANUAL REV 0 07 03 02 MT55 F OPERATION AND SAFETY DECALS...
Page 32: ...PAGE 32 MT55 F PARTS OPERATION MANUAL REV 0 07 03 02 MT55 F FOOT ASSY FOOT ASSY...
Page 53: ...MT55 F PARTS OPERATION MANUAL REV 0 07 023 02 PAGE 53 NOTE PAGE...