PAGE 20 — MC94SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (06/22/22)
START-UP
This section is intended to assist the operator with the initial
start-up of the unit. It is extremely important that
this section be read carefully before attempting
to use the mixer in the field.
DO NOT
use your
mixer until this section is thoroughly understood.
STARTING THE MIXER
The following steps outline the procedure for starting the
engine.
1. Place the fuel shut-off lever (Figure 14) in the
ON
position.
Figure 14. Fuel Shut-Off Lever
WARNING
Failure to understand the operation of the mixer could
result in severe damage to the mixer or personal injury.
Reference Figure 3 and Figure 4 for the location of any
components referenced in this manual.
CAUTION
NEVER
operate the mixer in a confined
area or enclosed area structure that does
not provide ample free flow of air.
ON
OFF
FUEL VALVE
LEVER
2. To start a cold engine, move the choke lever (Figure 15)
to the
CLOSED
position.
Figure 15. Choke Lever
3. Move the throttle lever (Figure 16) away from the slow
position, about 1/3 of the way toward the fast position.
Figure 16. Throttle Lever
CLOSE
CHOKE LEVER
OPEN
FAST
SLOW
THROTTLE
LEVER
Discount-Equipment.com
