MULTIQUIP MAYCO LS300G, Operation Manual

Page: 39 / 90

MAYCO LS300G CONCRETE PUMP • OPERATION MANUAL — REV. #2 (09/09/19) — PAGE 39
MAINTENANCE
*
1
Replace engine oil and filter at 100 hours, first time only.
*
2
Add “Supplemental Coolant Additives” (SCAs) to recharge the engine coolant.
*
3
Replace primary air filter element when restriction indicator shows a vacuum of 625 mm (25 in. H20).
* 4 If blowby hose needs to be replaced, ensure that the slope of the blowby hose is at least 1/2 inch per foot, with
no sags or dips that could collect moisture and/or oil.
Table 5. Inspection/Maintenance
10 Hrs
DAILY
250 Hrs 500 Hrs
1,000
Hrs
OTHER
Engine
Check Engine Fluid Levels X
Check Air Cleaner X
Check Battery Acid Level X
Check Fan Belt Condition X
Check for Leaks X
Check for Loosening of Parts X
Replace Engine Oil and Filter 1 X
Clean Air Filter X
Check Fuel Filter/Water Separator Bowl X
Clean Unit, Inside and Outside X
Change Fuel Filter X
Clean Radiator and Check Coolant Protection Level
2
X
Replace Air Filter Element
3
X
Check All Hoses and Clamps
4
X
Clean Inside of Fuel Tank X
Check Battery
X
Visually Check for Oil Leaks X
Pump
Hydraulic Oil Level X
Lubrication Box X
Replace Hydraulic Oil X
Clean Hydraulic Filters X
Grease Shuttle Axle Crank
X
2 Hrs.
Grease Shuttle Cylinder Monthly
Check System Pressure
X
Check Hardware for Tightness Weekly
Check Cutting Wear Ring Weekly
Trailer
Check Brake Lights
X
Check Tire Conditions
X
Inspect Safety Devices / Decals
X
Check Wheel Bearings 6 Months
Inspect Brake Lining 6 Months