MULTIQUIP GAC3.6HZ, Operation And Parts Manual

Page: 16 / 82

page 16 — gac3.6hz 60 hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
general infOrMatiOn
gac3.6hz FamiliaRizaTiON
generator
The Multiquip GAC3.6HZ generator has been designed
as a portable dual purpose power source for 60 Hz (single
phase) lighting facilities, power tools, submersible pumps
and other industrial and construction machinery.
These generators are mounted on rubber vibration isolators
that have a steel base backplate which is attached to the
protective steel pipe carrying frame. The protective carrying
frame is made of steel tubing and fully wraps around the
generators to protect against damage. See Figures 3, and
4 for the basic controls and indicators for the generator.
These portable generators are supplied with a electrical
control box. To reduce vibration caused by the engine, the
control box is also placed on rubber isolators.
control Box
The control box is provided with the following:
„ 240V twist-lock output receptacle (single phase).
„ 120V twist-lock receptacle (single phase).
„ 120V GFCI receptacle.
„ 15 Amp Main Circuit Breaker.
„ AC Voltmeter
„ Ground Terminal
„
Idle Control Switch
„
Operation Switch
daNgeR
Before connecting this generators to any building’s
electrical system, a licensed electrician must install an
isolation (transfer) switch.
Serious injury or death may result without this transfer
switch.