Multimo A 750, Assembly Instruction Manual

Page: 27 / 28

Page 25 Page 26
ATTENTION / HOW TO / READ ME / OWNER'S GUIDE
1. Most bunk beds must be securely attached to the wall, unless the bed is free
standing. Please check the product description for this information. Hardware
for mounting to concrete, brick or similar strong material is included.
2. When mounting to drywall, wall bunk beds must be attached to wooden or
metal studs in 2 or 3 points. Do not mount wall bunk beds directly to drywall
or paper-mache type wall without properly attaching it to studs. Please
choose appropriate fasteners for the type of wall the bed will be mounted
on. Drywall mounting hardware is not included.
3. For safety and product longevity you must periodically inspect the integrity
and tightness of the mounting and mechanical connections. Confirm
hardware remains properly affixed and connections are snug.
4. Do not lean or rest heavy objects on sides or top of furniture. This may cause
balance issues and compromise the integrity of your mounting connections.
5. Please use wall bunk beds and integrated shelves, desks and sofas as
intended. Do not jump and/or exceed supported weight limits. Do not sit or
lean on integrated shelves and desks. Improper use may cause personal
injury and damage to property.
· Always use the provided ladder when accessing the top bunk.
· Always use a ladder for additional support for the upper bunk when it is
open.
· Be slow, careful and aware of surroundings when opening the top bunk.
· Do not horseplay. Beds are to be slept on only.
· Make sure that support legs are fully extended and are flat on the floor.
Always be aware of where the leg is and will be.
6. With seasonal humidity change please inspect the interior and exterior of the
furniture for deformation and/or discoloration.
7. Before any un-mounting or disassembly please contact Multimo Beds for
technical support and instructions Failure to properly detach may result in
personal injury and damage to property.