Visit
for new product releases!
INST
ALLA
TION
Cop
yrigh
t © 2021 Multilink I
nc
. A
ll righ
ts r
eser
ved • Sp
ecific
ations subjec
t t
o change without notic
e • Re
v. 6/14/2021 •
Page 10
Do
cumen
t N
o. 020-306-20I
nstall
Proper Cover Installation
Improper Cover Installation
1
4
3
6
5
2
4.18 Attach Base to Cover
Using the supplied hardware attach the base to the
cover in the six available locations. Tighten each
screw with 15lbs per inch of torque MAXIMUM
to where they are flush with the plastic. DO NOT
overtighten. To ensure a proper seal tighten each
screw in a alternating pattern.
4.19 Installation Inspection
Once final installation is completed visually inspect
the Fiber Tap Plus. This includes but is not limited
to the grommet being sealed and tightened
correctly, each fiber adapter installed correctly
and tightened, and the cover seated evenly on the
base.
Installation (Cont.)
4.17 Place Cover Over Base
Place the Fiber Tap Plus cover of the base in
the orientation shown and ensure that the
cover is seated correctly on the base before
flipping the enclosure over safely.
