multilaneinc.com
1.
Introduction
The ML4062-CNT-Gen2 is designed to provide an efficient and easy method of programming
and testing the ML4062-TL2a-CON modules. It provides power and I2C communication to the
modules, allowing the user to access any register in the memory through I2C bus, where user is
able to control the power, monitor the voltage, temperature, etc…
2.
Key Features
Supports up to 150W in total
Supports up to 19W/port maximum
Eight interfaces allowing to operate eight modules simultaneously
I2C master driven from on board microcontroller
Current Sensor at each port
User friendly GUI for I2C R/W commands and loading custom MSA memory maps
USB interface
3.
ML4062-CNT-Gen2 Hardware
The subsequent sections cover the essential parts in the hardware, for board operation and
testing.
3.1
Power-Up
The ML4062-CNT-Gen2 host is powered up as following:
Apply 36V input minimum, through banana plugs U6 and U7.
Connect the host to your PC using a Type-B mini to Type-A USB cable.
3.2
Operating Conditions
The input voltage supply must follow the table below.
Parameter
Min
Typical
Unit
Vinput
36
48
V
Table 1: Voltage Operating Conditions
The ML4062-CNT-Gen2 includes eight ports, allowing to communicate with and configure all of
the eight modules simultaneously. The ML4062-CNT-Gen2 allows to dissipate
19W/Port
maximum
, for a total of 150W.
