AT4039EML
|
User Manual
28
|
P a g e
C
O
MMU
N
IC
A
T
IO
N
T
E
ST
&
ME
A
SU
R
EME
N
T
SO
LU
TI
O
N
S
Figure 20: Firmware Upgrade Using USB Cable
USB Driver Installation
The USB driver is available for download on
https://multilaneinc.com/berts-gui/
.
The following instructions are applicable for a manual USB driver installation using
Windows XP, Windows 7, 8 and 10.
Power on the instrument.
Plug-in the USB cable into the PC and connect it to the panel
Make sure the PC can locate and install the driver. If this does not happen automatically,
you will need to give Windows the path to the driver’s folder.
USB Driver Installation on Windows platforms:
Ignore the messages
new hardware found
or
driver software not successfully
installed
by pressing
cancel
or
close
.
Go to the device manager via a right click on
My Computer:
o
Click on
Manage
.
o
Click on
Device Manager
.
Right click on the top-level tab
(Here multilane-PC) and select “
Scan for hardware changes
”.
Figure 21:
Scan for Hardware Changes
