•
This pen is suitable for use by children over 8 years and adults. Children must only use
the pen under supervision from an adult.
•
Do not touch the nozzle as it can reach a very high temperature.
•
Do not input any other material into the filament loading hole.
•
Do not use any power adaptors provided by another manufacturer.
•
Do not use any filament provided by another manufacturer due to different parameters
of filament.
•
Keep the pen away from water at all times.
•
Store the pen in a safe place out of the reach of children.
Please read these instructions carefully before use and retain for future reference.
•
AC/DC adaptor
•
Filament
•
User manual
•
3D pen
•
Plastic screwdriver (to adjust the temperature and open the
back cover)
DC Socket
Temperature switch
Heating indicator
Power indicator
Speed controller
Filament loading hole
Unloading filament
button
Load filament button
Nozzle
IMPORTANT SAFETY INFORMATION
•
Connect the AC/DC adaptor to the AC power socket and the 3D pen to the DC power
socket. When the red LED comes on, the pen is in standby status.
•
Press the filament loading button in order to start heating. The green light will flash and
after around 40 seconds, the green light will stop flashing, indicating that it is ready for
OPERATION
WHAT’S INCLUDED
PRODUCT OVERVIEW