Model: 310-0900
3D Printing Pen
Page 1: ...Model 310 0900 3D Printing Pen ...
Page 2: ...ese instructions carefully before use and retain for future reference AC DC adaptor Filament User manual 3D pen Plastic screwdriver to adjust the temperature and open the back cover DC Socket Temperature switch Heating indicator Power indicator Speed controller Filament loading hole Unloading filament button Load filament button Nozzle IMPORTANT SAFETY INFORMATION Connect the AC DC adaptor to the ...
Page 3: ... and then press the button again to exit automatic mode Temperature Adjustment To adjust the temperature open the back cover and use the plastic screwdriver to turn the temperature switch either clockwise to increase the temperature or anticlockwise to reduce the temperature Note each level is 15 C and the temperature range is from 130 C to 240 C Speed Adjustment Slip the speed controller to adjus...
Page 4: ...ent and then reload it Failed to load filament Unload filament and cut the end off the filament Motherboard defective Repair or replace the motherboard No working temperature Heating partly defective Replace the nozzle set Correct Wrong Wrong FILAMENT CUT TROUBLESHOOTING Made in China PR2 9PP V 1 0 INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL ELECTRONIC EQUIPMENT When this product has...
