Page <3>
V1.0
06/04/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
• Soldering work must be conducted on a stable, non-combustible surface.
• Do not touch any metallic parts near the soldering tip.
• The iron must not be left unattended while it is connected to the supply mains.
• The soldering iron must be placed in it’s holder when not in use.
• Turn the soldering iron off and unplug it when it is not in use.
• This device must be earthed through the mains lead and plug.
What’s Included
• Soldering Iron and holder
• User manual
Product Overview
• Fast heating and precise temperature control.
• Ergonomic handle mounted two button temperature adjustment.
• Visual display for temperature setting.
• LED indicator for heating indication.
Operation
• Connect to the mains supply and turn on the soldering iron by pressing the mode button.
• Default temperature is set to 325°C and is shown on the display when initially powered on but thereafter the last set
temperature is stored and restored after being powered off.
• The mode button LED flashes brightly when the heating element is on and flashes less bright when the set temperature is
reached.
• If switching to a lower setting the mode button LED goes off until the temperature has dropped to the new setting.
Pre-set Temperature Adjustment
• Pr or - will increase or decrease the temperature in 9 initial pre-set steps:-
250°C/482°F; 300°C/572°F; 325°C/617°F; 350°C/662°F; 375°C/707°F; 400°C/752°F
425°F/ 797°F; 450°C/842°F; 480°C/896°F.
• The display shows the temperature set.
Quick Setting Mode
• Long press the mode button once in the normal working state to enter the quick temperature setting mode.
• Press + or - buttons to increase or decrease the temperature in the range 250°C to 480°C.
• The display shows the temperature set.
