Page <6>
V1.0
14/06/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Part Number
MP710079
MP710079 US
MP710080
MP710080 US
MP710081
MP710081 US
Current Regulation
Load from 10% to 90% Variation
50mA
Line from 90 to 264V AC Variation
20mA
Ripple & Noise (peak to peak)
≤50mA
Switching Operation Frequency
50kHz to 150kHz
Aux output 1
Fixed 3.3 /5V DC. 1.8A cont. 2A Max.
Aux output 2
Fixed 12V DC, 800mA cont. 1A Max.
Power Factor
>0.9
Efficiency at Maximum Power
≥80.5%
Volt and Amp Control Type
Rotary Encoder
Voltmeter and Ammeter Display
4 Digit LCD
Voltmeter Accuracy
5 counts for range V<5V
±0.2% +5 counts for range V≥5V
Ammeter Accuracy
15 counts for range I≤1A
±0.5% +6 counts for range I>1A
LCD Indication
CC, CV, Amp, Volt, Output ON-OFF, Aux output current
Protection
Short Circuit, Overload, Over Temperature, Tracking OVP
CE Approvals
LVD: EN 61010, EMC: EN 55011
Cooling System
Natural Convection
Dimensions (W×H×D)
70mm × 150mm × 250mm / 2.8″ × 6″ × 9.8″
Input Voltage (Universal input)
100V AC to 240V AC, 50Hz / 60Hz
Full Load Input Current at 230V AC
0.83A
Weight
2 kgs
Caution:
1. Use a grounded 3 pin AC source.
2. This unit is for indoor use only.
3. Do not operate or place this unit in a humid, dusty, in direct sunlight location or near any heat source.
4. Before plugging into local AC mains, check with the rating label at the back of the unit.
5. Do not block any ventilation openings of the unit.
6. This unit must be used within the specified rating, regular excessive continuous loading may cause damage to the power
supply.
7. The gauge size of input power cable must be at least 0.75mm2 and the total length of power cable must not exceed 3m.
