USB-ME-System Manual
8
3.3
MC_Rack
It is also not recommended to run any applications in the background when using
MC_Rack
.
Remove all applications from the Autostart folder.
Warning: The operating system settings of the data acquisition computer were pre-configured
by MCS and should not be changed by the user. Changing these settings can lead to program
instabilities and data loss.
Installing MC_Rack with the USB-ME-System connected to the computer
The Windows operating system detects a new hardware when the
USB-ME-System
is connected to
the computer, if the program has not been installed beforehand. Please make sure the device has power,
that is, the power LED is lighting. Simply cancel the "Found New Hardware Wizard" and proceed with the
installation of the
MC_Rack
program.
Connecting the USB-ME-System to a computer with installed MC_Rack
If
MC_Rack
had already been installed on the computer before the hardware was connected, the operating
system needs to load the driver once. After this procedure, the
USB-ME-System
will be automatically
recognized by the operating system.
1.
Connect the
USB-ME-System
to the USB port of the data acquisition computer. Please make sure the
device has power, that is, the power LED is lighting.
2.
Switch the computer on.
The "Found New Hardware Wizard" is displayed.
3.
Choose the option "No", not this time and continue with "Next".
4.
Choose the option "Install" the software automatically (recommended) and continue with "Next".
5.
The Wizard will automatically find the appropriate
USB-ME-System
driver. Continue with "Next".
6.
The driver installation is finished.
Please check the system requirements before you install the
MC_Rack
software. MCS cannot guarantee
that the software works properly if these requirements are not fulfilled. Please see the MC_Rack help or
manual for more information. It is recommended that you check the MCS web site for software updates
on a regular basis.
Double-click Setup.exe on the installation volume.
The installation assistant will show up and guide you through the installation procedure.
Follow the instructions of the installation assistant.
The
USB-ME-System
driver and
MC_Rack
are installed (or updated) automatically.
Summary of Contents for USB-ME128-System
Page 1: ...USB ME System Manual USB ME64 System USB ME128 System USB ME256 System...
Page 35: ...Index 31 7 Index...
Page 36: ...USB ME System Manual 32...
Page 38: ...34...
